Installation Instructions

The following instructions will guide the installer(s) through a quick and successful installation.

Concrete Installations (for concrete riser pipes and boxes)

All Plastic Solutions Trash Racks are supplied pre-drilled & include concrete anchor bolts.
NOTE: Not using the pre-drilled holes will void your warranty---Please call if you have ANY questions.

Tools Required:

Hammer drill
3/8" diameter masonry drill bit
1/2" wrench or Adjustable wrench

STEP 1: Lift Trash Rack onto concrete structure (typically can be done with 1 - 2 persons)
Note: Top of structure must be sound and flat (within 1/8") around top of
mounting surface---Mounting a Plastic Solutions Trash Rack to a structure that
is not sound will void your warranty.

STEP 2: Position (center) Trash Rack on structure and mark all mounting hole locations.

STEP 3: Remove Trash Rack from concrete structure

STEP 4: Drill mounting holes using a 3/8" diameter masonry drill bit

STEP 5: Install 3/8" X 3" stainless steel anchor bolts (supplied).

STEP 6: Lift Trash Rack over anchor bolts---insure Trash Rack is completely flush against
concrete mounting surface and then secure using flat washers and nuts (supplied)

STEP 7: Insure all anchor bolt nuts are tight and secure. DO NOT OVERTIGHTEN!

If you have any questions concerning mounting, please call our toll free number at 877-877-5727.